SR 110 is a very effective machine since two slim rods are produced at the same time, using a double hole HF-coil connected to one generator. The diameter is about 7-10mm, and the length can reach to 2,500mm. Every care has been taken to make the machine very operator-friendly and to allow fast restart of pulling after harvest of the produced slim rods. The glow in the source rods is maintained during harvest. This is made possible through a special valve closing between the main and upper chamber during the process. One set of source rods will yield 12 to 50 slim rods depending on the diameter of the source rods and the length of the slim rods. In the future, we are going to have a machine that can produce five slim rods at the same time—SR 130.